Epoxy flake flooring in Brisbane
Dusty, oil stained garage floor?
Get an epoxy flake floor in Brisbane that sweeps clean and takes cars, tools and traffic. Laid in 2 to 3 days from $85/m², with a 4 year workmanship warranty.
Thinking about a flake floor in Brisbane, but not sure who to trust?
Here is what customers said on Google once the job was done, and floors we have finished across South East Queensland.

“Reliable and professional throughout. Easy to deal with and competitive in pricing too. Highly recommend.”
Brad A Google review


More from Google
“He immediately identified the underlying problem, which no one else had been able to resolve, and took full control of the repair process.”
Fiona Cameron Google review“Steele took the time to clearly explain the process and options available.”
Jacob Manitzky Google review“He did a great job, used quality products and was flexible with timing to complete the work.”
Michelle Lohr Google review“On time, easy to deal with. Very clean and tidy and professional workmanship.”
Scott Smith Google review“Excellent services. Time and quality wise.”
Iman Rahmani Google review
Bare concrete in a Brisbane garage sheds dust, soaks up oil and shows every tyre mark. A flake floor seals it under a hard wearing, textured finish that cleans up with a mop.
Steele grinds, coats and seals every flake floor in Brisbane himself: the slab, the base coat, the flake broadcast and the clear top coat. It resists cracks, peeling and chemicals, and every floor carries a 4 year workmanship warranty.
Why choose flake in Brisbane?
Takes a beating
Handles cars, tools, impacts and daily traffic without cracking or fading.
Hides dust and marks
The speckled finish hides the everyday dirt of a working garage or shed.
Yours to design
Pick the flake colours, sizes and base coat to suit the space.
Ready for reactive clay
A lot of Brisbane sits on reactive clay, so older slabs often carry hairline cracks. They are filled before the base coat goes down.
Still deciding? Read metallic or flake epoxy, how to choose, epoxy or garage floor paint or what epoxy flooring costs per m².
What goes onto your Brisbane slab, layer by layer?
The slab
Every job starts with the concrete you already have. We look for cracks, damp and old coatings before anything goes down.
Ground and primed
We grind the surface, clean it and prime it, so the coating grips the concrete itself and not the dust sitting on top.
Epoxy base coat
A high quality epoxy base coat goes on next. Everything above it leans on this layer, so it never gets rushed.
Flake broadcast
Acrylic flakes are scattered across the wet epoxy in the colours and sizes you pick. The texture gives grip and hides dirt.
Clear top coat
A clear epoxy top coat locks the flakes in and brings up the gloss. A sweep or a mop keeps it looking that way.
What does flake flooring cost in Brisbane?
Steele’s rates per square metre. Every floor is quoted on its size and the state of the slab.
$85/m²
Standard flake, in any of the 24 blends.
$110/m²
Flake in natural stone.
2 to 3 days
Generally, on site. Then 5 to 7 days before the car goes back in.
4 years
Workmanship warranty on every epoxy floor.
Where does flake work in Brisbane?
Tap the closest one and it goes straight into your quote. Pick from 24 blends on the flake flooring page or in the Floor Studio.
See all 24 flake blendsTry them on your own floor in the Studio
Flake, metallic, sealed or paint?
Most people planning a floor are weighing up some of these. Here is how they compare.
| Flake epoxy | Metallic epoxy | Sealed concrete | Paint or DIY kit | |
|---|---|---|---|---|
| Looks | Speckled and textured | Glossy, flowing, one of a kind | Your concrete, darker and protected | One flat colour |
| Underfoot | Textured, good grip | Smooth. Grip can go in the top coat | Much like bare concrete | Smooth |
| Hides dust and marks | Very well | Shows dust, wipes clean | Shows old stains | Shows wear quickly |
| Hot tyres | Holds | Holds, as a full system on ground concrete | Depends on the sealer | Often lifts |
| Best for | Hard working garages and sheds | Showpiece garages, shops and rooms | Keeping the concrete look, outdoors too | A quick, cheap refresh |
DefenX lays flake, metallic and sealed concrete floors. Not sure which suits your space? Ask Steele. Or try colours in the Studio.
Flake floors across Brisbane: is your suburb here?
DefenX lays epoxy flake floors in garages, sheds, patios and workshops across Brisbane, from the northside to the bayside. Every job starts with the slab you have, so Steele checks it for cracks, damp and old coatings before he quotes.
A lot of Brisbane sits on reactive clay that swells after summer storms and shrinks in dry spells. That movement is why so many older slabs here have hairline cracks. They are usually fine to coat once they have been filled.
Under a raised Queenslander, the slab was often poured for storage rather than living on. If you are turning it into a rumpus or a garage, those slabs need checking for damp first.
Where Steele lays flake in Brisbane
- Chermside
- Aspley
- Albany Creek
- Everton Park
- Stafford
- Kedron
- Nundah
- Carindale
- Mount Gravatt
- Sunnybank
- Calamvale
- Holland Park
- Annerley
- Wishart
- Wynnum
- Manly
- Bulimba
- Hawthorne
- Cannon Hill
- Camp Hill
- The Gap
- Kenmore
- Indooroopilly
- Chapel Hill
- Ashgrove
- Bardon
- Paddington
And everywhere in between, out to Moreton Bay, Redlands, Logan and Ipswich.
Flake flooring in Brisbane
Questions people ask first
Ask Steele about your floor before you choose a finish. He replies within 24 hours.
How much does epoxy flake flooring cost in Brisbane?
Flake is $85/m² standard or $110/m² in natural stone. Where your floor lands depends on its size and the condition of the concrete, so Steele quotes each one. Send a photo and a rough size and he replies within 24 hours.
Do you lay flake floors in Brisbane?
Yes. Steele quotes and pours across Brisbane, north, south, east and west, and out into Moreton Bay, Redlands, Logan and Ipswich. Add your suburb to the request so he can confirm timing for your job.
How long does a flake floor take?
Generally 2 to 3 days on site, then allow 5 to 7 days before the car goes back in. Each layer needs time before the next one, so the schedule follows the conditions on the day.
Is a flake floor slippery?
The flake texture gives grip underfoot. Ask Steele about adding more grip to the top coat anywhere that gets wet, like near the roller door.
Will hot tyres lift the floor?
Hot tyre lifting mostly happens with thin paint on coatings over concrete that was never ground. A metallic or flake floor is a full epoxy system bonded to ground concrete, which is what stops it lifting.
My slab has cracks. Can it still be done?
Usually, yes. A lot of Brisbane sits on reactive clay, so hairline cracks in older slabs are common. They get filled before the coating goes down. A crack where one side has dropped is different, and Steele will tell you if yours needs more than filling.
Metallic or flake for a garage?
Metallic is the showpiece: smooth, glossy and one of a kind. Flake is the workhorse: textured, good grip and it hides dust and marks. Both go over the same prepared slab.
Can I choose the colours?
Yes. There are 24 blends to pick from, and you can try them on a photo of your own space in the DefenX Studio before you send Steele the design.
Can you coat the slab under my Queenslander?
Often, yes. Slabs under raised Queenslanders were usually poured for storage, so they need checking for damp coming up from the ground before they are coated. Mention it in the form and send a photo.
Planning another floor in Brisbane?
Garage floors
Garage floor epoxy in Brisbane
Metallic epoxy
Metallic epoxy in Brisbane
Prices per m²
What epoxy flooring costs
Laying flake somewhere else in South East Queensland?
Not ready for a quote yet?
The 9 Point Epoxy Quote Checklist
What to make every quote name before you compare prices.
- The one preparation step a cheap quote leaves out, and why the floor lifts without it
- The two slab checks to ask for before anyone names a price
- The nine lines a proper quote names, so three quotes finally line up
Free quote
Tell us about the space.
Two quick steps. We come back with a quote within 24 hours, and Steele will call if it is easier to talk it through.
- Call
- 0422 437 666
- steele@defenx.com.au
- Hours
- Mon to Sat, 9am to 5pm
- Licence
- QBCC 15371499
4.8 on Google · QBCC licensed
P.S. Send Steele a photo and a rough size and he replies with a free quote within 24 hours. A flake floor in Brisbane is generally 2 to 3 days on site, from $85/m², with a 4 year workmanship warranty.
Leave it, and oil sits in the bare concrete and spreads, and the dust keeps coming. Steele pours every floor himself, so he only takes on what he can pour properly.

