Epoxy flake flooring on the Gold Coast
Sand and oil all over the garage floor?
Get an epoxy flake floor on the Gold Coast that sweeps clean and takes cars, tools and traffic. Laid in 2 to 3 days from $85/m², with a 4 year workmanship warranty.
Thinking about a flake floor in Gold Coast, but not sure who to trust?
Here is what customers said on Google once the job was done, and floors we have finished across South East Queensland.

“Reliable and professional throughout. Easy to deal with and competitive in pricing too. Highly recommend.”
Brad A Google review


More from Google
“He immediately identified the underlying problem, which no one else had been able to resolve, and took full control of the repair process.”
Fiona Cameron Google review“Steele took the time to clearly explain the process and options available.”
Jacob Manitzky Google review“He did a great job, used quality products and was flexible with timing to complete the work.”
Michelle Lohr Google review“On time, easy to deal with. Very clean and tidy and professional workmanship.”
Scott Smith Google review“Excellent services. Time and quality wise.”
Iman Rahmani Google review
Gold Coast garages cop sand off the beach, water off the boat and hot tyres off the M1. Bare concrete soaks it all up. A flake floor seals the slab under a textured finish that sweeps clean.
Steele grinds, coats and seals every flake floor on the Gold Coast himself: the slab, the base coat, the flake broadcast and the clear top coat. It resists cracks, peeling and chemicals, and every floor carries a 4 year workmanship warranty.
Why choose flake on the Gold Coast?
Takes a beating
Handles cars, tools, impacts and daily traffic without cracking or fading.
Hides dust and marks
The speckled finish hides the everyday dirt of a working garage or shed.
Yours to design
Pick the flake colours, sizes and base coat to suit the space.
Checked for damp
Near the beach and the canals the ground under a slab can stay wet. Steele checks for moisture before he quotes, because damp is what pushes a coating off.
Still deciding? Read metallic or flake epoxy, how to choose, epoxy or garage floor paint or what epoxy flooring costs per m².
What goes onto your Gold Coast slab, layer by layer?
The slab
Every job starts with the concrete you already have. We look for cracks, damp and old coatings before anything goes down.
Ground and primed
We grind the surface, clean it and prime it, so the coating grips the concrete itself and not the dust sitting on top.
Epoxy base coat
A high quality epoxy base coat goes on next. Everything above it leans on this layer, so it never gets rushed.
Flake broadcast
Acrylic flakes are scattered across the wet epoxy in the colours and sizes you pick. The texture gives grip and hides dirt.
Clear top coat
A clear epoxy top coat locks the flakes in and brings up the gloss. A sweep or a mop keeps it looking that way.
What does flake flooring cost on the Gold Coast?
Steele’s rates per square metre. Every floor is quoted on its size and the state of the slab.
$85/m²
Standard flake, in any of the 24 blends.
$110/m²
Flake in natural stone.
2 to 3 days
Generally, on site. Then 5 to 7 days before the car goes back in.
4 years
Workmanship warranty on every epoxy floor.
Where does flake work on the Gold Coast?
Tap the closest one and it goes straight into your quote. Pick from 24 blends on the flake flooring page or in the Floor Studio.
See all 24 flake blendsTry them on your own floor in the Studio
Flake, metallic, sealed or paint?
Most people planning a floor are weighing up some of these. Here is how they compare.
| Flake epoxy | Metallic epoxy | Sealed concrete | Paint or DIY kit | |
|---|---|---|---|---|
| Looks | Speckled and textured | Glossy, flowing, one of a kind | Your concrete, darker and protected | One flat colour |
| Underfoot | Textured, good grip | Smooth. Grip can go in the top coat | Much like bare concrete | Smooth |
| Hides dust and marks | Very well | Shows dust, wipes clean | Shows old stains | Shows wear quickly |
| Hot tyres | Holds | Holds, as a full system on ground concrete | Depends on the sealer | Often lifts |
| Best for | Hard working garages and sheds | Showpiece garages, shops and rooms | Keeping the concrete look, outdoors too | A quick, cheap refresh |
DefenX lays flake, metallic and sealed concrete floors. Not sure which suits your space? Ask Steele. Or try colours in the Studio.
Flake floors across the Gold Coast: is your suburb here?
DefenX lays flake floors in garages, sheds and patios across the Gold Coast, from Ormeau and Coomera down to Coolangatta and out to the hinterland. Steele checks every slab for cracks, damp and old coatings before he quotes.
Near the beach and along the canals the ground can sit wet for days after rain, and some of it stays damp all year. Moisture coming up through a slab is what pushes coatings off from below, so Steele checks for it before he quotes.
In the northern estates around Coomera and Pimpama, a lot of garages sit on slabs that are only a year or two old. New concrete needs to dry out before it is coated, and Steele will ask when yours was poured.
Where Steele lays flake on the Gold Coast
- Coomera
- Upper Coomera
- Pimpama
- Ormeau
- Hope Island
- Helensvale
- Oxenford
- Southport
- Labrador
- Ashmore
- Benowa
- Surfers Paradise
- Broadbeach
- Mermaid Waters
- Burleigh Heads
- Palm Beach
- Varsity Lakes
- Robina
- Elanora
- Currumbin
- Tugun
- Nerang
- Mudgeeraba
- Gilston
- Worongary
- Tallebudgera
- Bonogin
And everywhere in between, from the Logan border down to Coolangatta.
Flake flooring on the Gold Coast
Questions people ask first
Ask Steele about your floor before you choose a finish. He replies within 24 hours.
How much does epoxy flake flooring cost on the Gold Coast?
Flake is $85/m² standard or $110/m² in natural stone. Where your floor lands depends on its size and the condition of the concrete, so Steele quotes each one. Send a photo and a rough size and he replies within 24 hours.
Do you lay flake floors on the Gold Coast?
Yes. Steele quotes and pours across the Gold Coast, from Ormeau and Coomera down to Coolangatta and out to the hinterland. Add your suburb to the request so he can confirm timing for your job.
How long does a flake floor take?
Generally 2 to 3 days on site, then allow 5 to 7 days before the car goes back in. Each layer needs time before the next one, so the schedule follows the conditions on the day.
Is a flake floor slippery?
The flake texture gives grip underfoot. Ask Steele about adding more grip to the top coat anywhere that gets wet, like near the roller door.
Will hot tyres lift the floor?
Hot tyre lifting mostly happens with thin paint on coatings over concrete that was never ground. A metallic or flake floor is a full epoxy system bonded to ground concrete, which is what stops it lifting.
My slab has cracks. Can it still be done?
Usually, yes. Hairline cracks get filled before the coating goes down. A crack where one side has dropped is different, and Steele will tell you if yours needs more than filling.
Metallic or flake for a garage?
Metallic is the showpiece: smooth, glossy and one of a kind. Flake is the workhorse: textured, good grip and it hides dust and marks. Both go over the same prepared slab.
Can I choose the colours?
Yes. There are 24 blends to pick from, and you can try them on a photo of your own space in the DefenX Studio before you send Steele the design.
Does living near the beach matter?
Inside a garage, the bigger issue near the coast is usually damp in the slab rather than the air. Steele checks for moisture before he quotes. Ask him about anything outdoors or exposed to the weather.
My house is a new build. When can the garage floor be done?
New concrete has to dry out before it is coated. The usual minimum is 28 days, and longer in wet weather. Tell Steele when the slab was poured and he will plan around it.
Do you work in the hinterland?
Yes. The Gilston recreation room on this page is in the hinterland. Add your suburb and Steele will confirm timing.
Planning another floor on the Gold Coast?
Garage floors
Garage floor epoxy on the Gold Coast
Metallic epoxy
Epoxy flooring on the Gold Coast
Prices per m²
What epoxy flooring costs
Laying flake somewhere else in South East Queensland?
Not ready for a quote yet?
The 9 Point Epoxy Quote Checklist
What to make every quote name before you compare prices.
- The one preparation step a cheap quote leaves out, and why the floor lifts without it
- The two slab checks to ask for before anyone names a price
- The nine lines a proper quote names, so three quotes finally line up
Free quote
Tell us about the space.
Two quick steps. We come back with a quote within 24 hours, and Steele will call if it is easier to talk it through.
- Call
- 0422 437 666
- steele@defenx.com.au
- Hours
- Mon to Sat, 9am to 5pm
- Licence
- QBCC 15371499
4.8 on Google · QBCC licensed
P.S. Send Steele a photo and a rough size and he replies with a free quote within 24 hours. A flake floor on the Gold Coast is generally 2 to 3 days on site, from $85/m², with a 4 year workmanship warranty.
Leave it, and oil sits in the bare concrete and spreads, and the dust keeps coming. Steele pours every floor himself, so he only takes on what he can pour properly.

