Mon to Fri, 7am to 5pm0422 437 666

Epoxy floors on the Gold Coast

Comparing epoxy quotes on the Gold Coast? Watch this first.

Three quotes that do not line up usually leave out the same thing. Steele shows you what it is, and gives you the list to check every quote against.

A metallic epoxy floor poured by DefenX
Steele is recording this video now. The checklist below is ready today.

Free download

The 9 Point Epoxy Quote Checklist

What to make every quote name before you compare prices.

  • The one preparation step a cheap quote leaves out, and why the floor lifts without it
  • The two slab checks to ask for before anyone names a price
  • The nine lines a proper quote names, so three quotes finally line up
What kind of space?

No spam. Steele may follow up once about your floor.

  • 4.6 on Googlefrom 9 reviews
  • QBCC licence15371499
  • Free quotesback within 24 hours
  • Steele Davis, owner of DefenX.He quotes and pours every floor.

What is your floor like right now?

Pick the one closest to yours. It changes what needs to happen before anything goes down.

Why garage floors fail

A floor that is going to fail looks fine on the day it goes down. These are the reasons it lets go later.

  1. Hot tyres

    Tyres come in hot off the road and soften thin coatings. When the car backs out, the coating comes with them.

  2. Damp from below

    After a Brisbane storm the ground under a slab stays wet. Moisture moving up through the concrete pushes a coating off from underneath.

  3. No grinding

    A coating sticks to whatever is on top: dust, oil and the weak skin of the slab. Grinding takes that off so the epoxy bonds to sound concrete.

  4. Rushed curing

    Each layer needs time before the next one and before the floor takes weight. Humidity in Brisbane changes how long that is, so the schedule follows the conditions.

Anatomy of a DefenX floor

Five layers. One floor.

Every DefenX floor is built up in five layers. Tap one to see what it does.

Picture it finished. What changes?

Tap the one you are here for and it goes straight into your quote.

The offer

The Slab Check Quote

Most epoxy floor quotes are a number on a page. This one starts with the slab.

  1. Steele checks the slab before any price

    Cracks, damp and old coatings are found first, because that is where failed floors start. The quote covers what your slab needs, not a guess.

  2. The preparation is named, not hidden

    Grinding, crack repair and removal are written into the quote beside the system, so you can hold it against any other quote line by line.

  3. The 9 point checklist, free

    Download it above and keep it beside every quote you get, including this one.

  4. A Floor Studio preview of your room

    Upload a photo at defenx.com.au/studio and try the colours on your own floor before you decide.

  5. A 10 minute call with Steele

    Book it below. He takes the call himself and tells you straight whether the slab is worth coating.

  6. Free, with a reply within 24 hours

    Send a photo and a rough size. The quote comes back within a day, and nothing is owed for it.

Steele quotes and pours every job himself, so he only takes on what he can pour properly.

Metallic epoxy on the Gold Coast

DefenX poured the copper and black floor in a recreation room at Gilston, in the Gold Coast hinterland. The same system goes into garages, sheds and shops across the coast, in whatever colours you choose.

Near the beach and along the canals the ground can sit wet for days after rain, and some of it stays damp all year. Moisture coming up through a slab is what pushes coatings off from below, so Steele checks for it before he quotes.

In the northern estates around Coomera and Pimpama, a lot of garages sit on slabs that are only a year or two old. New concrete needs to dry out before it is coated, and Steele will ask when yours was poured.

Copper and black metallic epoxy floor in a recreation room at Gilston
Gilston recreation roomA golf lounge in the Gold Coast hinterland, poured in copper and black.

Suburbs Steele quotes in

North
  • Coomera
  • Upper Coomera
  • Pimpama
  • Ormeau
  • Hope Island
  • Helensvale
  • Oxenford
Central
  • Southport
  • Labrador
  • Ashmore
  • Benowa
  • Surfers Paradise
  • Broadbeach
  • Mermaid Waters
South
  • Burleigh Heads
  • Palm Beach
  • Varsity Lakes
  • Robina
  • Elanora
  • Currumbin
  • Tugun
Hinterland
  • Nerang
  • Mudgeeraba
  • Gilston
  • Worongary
  • Tallebudgera
  • Bonogin

And everywhere in between, from the Logan border down to Coolangatta.

“Steele took the time to clearly explain the process and options available.”

Jacob Manitzky, Google review

“He did a great job, used quality products and was flexible with timing to complete the work.”

Michelle Lohr, Google review

“On time, easy to deal with. Very clean and tidy and professional workmanship.”

Scott Smith, Google review

“Reliable and professional throughout. Easy to deal with and competitive in pricing too. Highly recommend.”

Brad A, Google review

Questions people ask first

Do you pour floors on the Gold Coast?

Yes. Steele quotes and pours across the Gold Coast, from Ormeau and Coomera down to Coolangatta and out to the hinterland. Add your suburb to the request so he can confirm timing for your job.

How much will my floor cost?

Three things set the price: the size of the floor, the state of the slab and the finish you choose. Send a photo and a rough size and Steele will quote it. Ask for the preparation to be named as well as the pour, so you can compare it fairly with any other quote.

What happens on the 10 minute call?

You tell Steele what is on the floor now, what it is used for and what you want it to be. He tells you what the slab will need, what to watch for in any quote, and whether a photo is enough or he should see it in person.

Do I have to book a call to get a quote?

No. Send a photo and your number through the form and Steele replies within 24 hours. The call is there for people who want to talk it through first.

Is the checklist really free?

Yes. It is the same list Steele works to, written down so you can hold any quote against it. There is no catch and no obligation.

Will hot tyres lift the floor?

Hot tyre lifting mostly happens with thin paint-on coatings over concrete that was never ground. A metallic floor is a full epoxy system bonded to ground concrete, which is what stops it lifting.

Is a metallic floor slippery?

The finish is smooth and glossy, so it can be slippery when wet. If the floor is in a garage, a wet entry or a shop, ask Steele about adding grip to the top coat.

Will my floor match the Studio preview exactly?

Not exactly, and that is the point of metallic. The Studio shows the colour in your room. The pattern forms as the pigment settles, so your floor will be the only one like it.

So, what would stop you?

Say the slab checks out, you like the colour and the timing works. Is there anything else that would hold you back?

If it is the price, the checklist shows you how to compare quotes properly. If it is the slab, a photo tells Steele most of what he needs. If it is time, the call takes 10 minutes.